A continuación, seleccione una categoría para ver las opciones de filtrado y reducir su búsqueda.

Herramientas y suministros
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Soluciones incluidas
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Automatización industrial
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Componentes pasivos

Sensores
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Cables y alambres
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Conectores
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Dispositivos optoelectrónicos
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Electromecánica
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Semiconductores
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Gabinetes

Potencia

Prueba y medición
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Administración térmica

Sin clasificar
 Mostrar más 
Resultados: 1,680
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS
SparkFun Accesorios SparkFun Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards but are actually the much smaller JST-SH type. 17En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Heat Sink Compound 47En existencias
115En pedido
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun 2x3 Pin Shrouded Header 31En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This red Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room no 23En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Stackable Header 2x23 Pin Female 200En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet 61En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
Hoja de datos
23En existencias
50Se espera el 10/7/2026
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Soldering Iron Stand 3En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA. 77En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas. 42En existencias
70Se espera el 8/7/2026
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
Hoja de datos
96En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun USB 2.0 type A to micro USB 5-pin. This is a new smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Works great wi 4En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your
Hoja de datos
24En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a very simple clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (see Related Items below). 1.5VDC f 30En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA. 88En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:465-470nm Blue3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](ht 25En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e 176En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Huge 10mm through-hole LEDs. Mood-light an entire wall!Features:3.0-3.4VDC Forward Voltage80mA Forward Current30 degree viewing angle16 000-20 000 MCD outputDocuments:DatasheetLED Tutorial 10En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding
Hoja de datos
166En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is pe 4En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun It's your basic black action button! This is a very useful small panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6.75mm in diameter. This button is perfect for basic On/Off functions. Overall length (including leads) 66En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun LilyPad Slide Switch 10En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet
Hoja de datos
341En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a time saving kit of jumper wires - cut stripped and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2 5 7 10 12 15 17 20 22 25 50 75 100 and 125mm - 10 pieces of each.Inclu 24En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con 10En existencias
Min.: 1
Mult.: 1