LI-USB30-OV2311-125H

Leopard Imaging
931-LI-USB30-OV2311
LI-USB30-OV2311-125H

Fabricante:

Descripción:
Herramientas de desarrollo para cámaras OmniVision OV2311 CMOS 2MP Image SensorActive Pixels:1600H x 1300VFocusing Range: 50cm to InfinityOptical Format: 1/2.9 (Default Firmware)

Disponibilidad

Existencias:
0

Aún puede comprar este producto que se encuentra pendiente.

Mínimo: 1   Múltiples: 1
Precio unitario:
$-.--
Precio ext.:
$-.--
Est. Tarifa:

Precio (USD)

Cantidad Precio unitario
Precio ext.
$289.00 $289.00

Atributo del producto Valor de atributo Seleccionar atributo
Leopard Imaging
Categoría de producto: Herramientas de desarrollo para cámaras
Development Kits
Camera
OV2311
USB
5 V
0 C
+ 50 C
Marca: Leopard Imaging
Dimensiones: 26 mm x 26 mm x 20 mm
Tipo de producto: Camera Development Tools
Cantidad de empaque de fábrica: 1
Subcategoría: Development Tools
Peso de la unidad: 154.890 g
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

                        
Product will have default firmware unless specified. Please
review the following conditions if applicable to your products
firmware.

For USB3.0 and USB2.0 cameras, the supplier will need to flash
the firmware and/or FPGA binary.

Cameras with built-in ISP (except for the AR0234-YUV), the
supplier will need to flash the ISP binary to camera.
For all the MIPI adapters with FPGA for Jetson, supplier will
need to flash the FPGA binary.

For all the Jetson boxes or carrier board with SOM, supplier
will need to flash the OS image and install the driver.

Please contact a Mouser Technical Support Representative for
further assistance.

5-0725-1

CNHTS:
8543709990
USHTS:
8525894000
ECCN:
EAR99

LI-USB30-OV2311-125H Development Kit

Leopard Imaging LI-USB30-OV2311-125H Development Kit is designed to evaluate the OV2311 image sensor. This development kit features USB 3.0 super speed support, 10-bit RAW data output without compression, a monochrome sensor, and a global shutter. The LI-USB30-OV2311-125H kit supports the register access function and provides customization services. This development kit operates at a 5V power supply voltage and 0°C to 50°C temperature range. The LI-USB30-OV2311-125H development kit is available in 26mm x 26mm x 20mm dimensions. This kit is ideally used in scientific cameras and machine vision.