Todos los resultados (377)

Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS
Marki Microwave Acondicionamiento de señales A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.
Hoja de datos
1Se espera el 26/8/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The C13-0140 is a broadband 1-40 GHz, 13 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
Hoja de datos
1Se espera el 24/12/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Hoja de datos
1Se espera el 20/10/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales This general purpose high pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during up-conversion or for removing spurious interference and noise.
Hoja de datos
1Se espera el 17/8/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MM1-1857H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Hoja de datos
1Se espera el 15/12/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales A resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Hoja de datos
1Se espera el 29/12/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Hoja de datos
1Se espera el 2/10/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Hoja de datos
1Se espera el 13/11/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales A wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz. The ADM-8556 is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The ADM-8558 is a wideband distributed low noise amplifier capable of providing 16 dB gain and +23 dBm OIP3 from 0.005 to 20 GHz and a low 1.8 dB typical noise figure from 7 to 15 GHz.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales A high-linearity low noise amplifier capable of providing 15 dB gain, 2.1 dB noise figure and +27 dBm OIP3 from 300 kHz to 10 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales A high-linearity, low noise amplifier capable of providing 10.5 dB gain and +26 dBm OIP3 across a broad 0.2-20 GHz bandwidth.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The ADM-8625PC is a high-linearity low noise amplifier capable of providing 18 dB gain, 1.4 dB noise figure and +29 dBm OIP3 from 750 MHz to 8 GHz.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales A high-linearity, high gain, low noise distributed amplifier capable of providing +22dBm output power up to 35 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales A high-linearity amplifier capable of providing +18 dBm output power up to 10 GHz. The ADM1-8095PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Adaptadores RF - En series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Adaptadores RF - Entre series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - En series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - Entre series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - En series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Adaptadores RF - En series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Adaptadores RF - Entre series The ADPMVFK is a 2.4mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Adaptadores RF - En series The ADPMVFV is a 2.4mm Male to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1