Marki Microwave RF e inalámbricos

Resultados: 589
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS
Marki Microwave Herramientas de desarrollo RF The EVAL-NLTL-6796 is a connectorized evaluation board for the NLTL-6796SM is a MMIC 0.5-3.5 GHz non-linear transmission line (NLTL) based comb generator.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVAL-PBR-0003 is a connectorized evaluation board for the PBR-0003SMG surface mount 10 MHz to 3 GHz high isolation power divider.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVAL-PBR-0006 is a connectorized evaluation board for the PBR-0006SMG surface mount 10 MHz to 6 GHz high isolation power divider.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVAL-PBR-0012 is a connectorized evaluation board for the PBR-0012SMG surface mount 10 MHz to 3 GHz high isolation power divider.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block).
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the ABSD-10169PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block).
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-AKA-1300P is a connectorized evaluation board for the AKA-1300PSM is a low-cost, cascadable broadband InGaP HBT amplifier.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-AKA-1310P is a connectorized evaluation board for the AKA-1310PSM is a low-cost, cascadable broadband InGaP HBT amplifier.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-AKA-1400P is a connectorized evaluation board for the AKA-1400PSM Broadband InGaP SMT surface mount DC 14 GHz Amplifier.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-AKA-1500P is a connectorized evaluation board for the AKA-1500PSM Broadband InGaP SMT surface mount DC 14 GHz Amplifier.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the AMM-10202PSM. The AMM-10202PSM is a surface-mount LO driver amplifier that is designed to provide sufficient LO drive for an H or S diode mixer.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the AMM-10220PSM. The AMM-10220PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L or H diode mixer from 2 to 26 GHz.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-AMM-7473P is a connectorized evaluation board for the AMM-7473PSM 0.4-27 GHz surface mount amplifier.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-AMM-8211P is a connectorized evaluation board for the AMM-8211PSM surface mount 22-57 GHz GaAs LO driver amplifier
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the AMM-9619PSM. The AMM-9619PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L or H diode mixer from 2 to 26 GHz.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the AMM-9853PSM. This version is designed to be used with external bias tees. The AMM-9853PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the AMM-9854PSM. This version is designed to be used with external bias tees. The AMM-9854PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the AMM-9855PSM. This version is designed to be used with external bias tees. The AMM-9855PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the AMM-9858PSM. The AMM-9858PSM is a wideband low noise amplifier capable of providing 17 dB gain and +30 dBm OIP3 with a low 1.9 dB typical noise figure.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the AMM-9859PSM. The AMM-9859PSM is a wideband low noise amplifier capable of providing 15 dB gain and +28 dBm OIP3 with a low 1.9 dB typical noise figure.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the AMM-9860PSM. The AMM-9860PSM is a wideband low noise amplifier capable of providing 13.5 dB gain and +28 dBm OIP3 with a low 2.7 dB typical noise figure.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the AMM-9861PSM. The AMM-9861PSM is a wideband low noise amplifier capable of providing 11.7 dB gain and +24 dBm OIP3 with a low 2.5 dB typical noise figure.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the AMM-9862PSM. The AMM-9862PSM is a wideband gain block capable of providing 10 dB gain and +23 dBm OIP3 with a low 3.4 dB typical noise figure.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-APM-7516PSM is a connectorized evaluation board for the APM-7516PSM Low Phase Noise surface mount 1.5-20 GHz Amplifier.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-ATN00-0040P is a connectorized evaluation board for the ATN00-0040PSM DFN packaged surface mount DC-40GHz 0dB Attenuator.
Hoja de datos
Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1