|
|
SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:465-470nm Blue3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](ht
- COM-10635
- SparkFun
-
1:
$1.01
-
19In Stock
|
Mouser Part #
474-COM-10635
|
SparkFun
|
SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:465-470nm Blue3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](ht
|
|
19In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e
- COM-10803
- SparkFun
-
1:
$4.14
-
145In Stock
|
Mouser Part #
474-COM-10803
|
SparkFun
|
SparkFun Accessories PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e
|
|
145In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount into a 20.2mm diameter hole and are rated up to 16A @ 12v. These simple SPST on-off switches have three terminals the two tha
- COM-11155
- SparkFun
-
1:
$1.75
-
20In Stock
|
Mouser Part #
474-COM-11155
|
SparkFun
|
SparkFun Accessories These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount into a 20.2mm diameter hole and are rated up to 16A @ 12v. These simple SPST on-off switches have three terminals the two tha
|
|
20In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding
- COM-11409
- SparkFun
-
1:
$5.50
-
65In Stock
-
100On Order
|
Mouser Part #
474-COM-11409
|
SparkFun
|
SparkFun Accessories For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding
|
|
65In Stock
100On Order
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 30mm and has two mounting holes on top.Dimensions: 9.5mm x 45mmDocuments:Datasheet (C3031N-1A2-B10K-GP)
- COM-11621
- SparkFun
-
1:
$1.41
-
31In Stock
|
Mouser Part #
474-COM-11621
|
SparkFun
|
SparkFun Accessories A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 30mm and has two mounting holes on top.Dimensions: 9.5mm x 45mmDocuments:Datasheet (C3031N-1A2-B10K-GP)
|
|
31In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is pe
- COM-11971
- SparkFun
-
1:
$7.98
-
2In Stock
|
Mouser Part #
474-COM-11971
|
SparkFun
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is pe
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in
- GPS-15246
- SparkFun
-
1:
$7.02
-
25In Stock
|
Mouser Part #
474-GPS-15246
|
SparkFun
|
SparkFun Accessories The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet
- PRT-00119
- SparkFun
-
1:
$2.07
-
254In Stock
|
Mouser Part #
474-PRT-00119
|
SparkFun
|
SparkFun Accessories DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet
|
|
254In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a time saving kit of jumper wires - cut stripped and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2 5 7 10 12 15 17 20 22 25 50 75 100 and 125mm - 10 pieces of each.Inclu
- PRT-00124
- SparkFun
-
1:
$9.42
-
33In Stock
-
71Expected 9/21/2026
|
Mouser Part #
474-PRT-00124
|
SparkFun
|
SparkFun Accessories This is a time saving kit of jumper wires - cut stripped and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2 5 7 10 12 15 17 20 22 25 50 75 100 and 125mm - 10 pieces of each.Inclu
|
|
33In Stock
71Expected 9/21/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con
- PRT-00429
- SparkFun
-
1:
$2.25
-
30In Stock
-
80Expected 9/22/2026
|
Mouser Part #
474-PRT-00429
|
SparkFun
|
SparkFun Accessories Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con
|
|
30In Stock
80Expected 9/22/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Jumper - 2 Pin
- PRT-09044
- SparkFun
-
1:
$0.50
-
1,367In Stock
|
Mouser Part #
474-PRT-09044
|
SparkFun
|
SparkFun Accessories Jumper - 2 Pin
|
|
1,367In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of
- PRT-09385
- SparkFun
-
1:
$4.95
-
13In Stock
|
Mouser Part #
474-PRT-09385
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of
|
|
13In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of 10. Check below f
- PRT-10927
- SparkFun
-
1:
$3.75
-
4In Stock
|
Mouser Part #
474-PRT-10927
|
SparkFun
|
SparkFun Accessories These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of 10. Check below f
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Now for all of your coin cell battery surface mount needs the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connects to the positive (+) side of the
- PRT-11892
- SparkFun
-
1:
$1.25
-
8In Stock
|
Mouser Part #
474-PRT-11892
|
SparkFun
|
SparkFun Accessories Now for all of your coin cell battery surface mount needs the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connects to the positive (+) side of the
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories A simple constant current power supply that outputs 12.6VDC and 10A. It comes in a robust metal enclosure (IP68 rated) with a 100 000 hour service life. It features Over-voltage Over-current Short Circuit and Over-temperature safety features. This
- PRT-18722
- SparkFun
-
1:
$49.69
-
2In Stock
|
Mouser Part #
474-PRT-18722
|
SparkFun
|
SparkFun Accessories A simple constant current power supply that outputs 12.6VDC and 10A. It comes in a robust metal enclosure (IP68 rated) with a 100 000 hour service life. It features Over-voltage Over-current Short Circuit and Over-temperature safety features. This
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories It's like an Xacto knife only better. We use these extensively when working with PCBs. These small knives work well for cutting traces scraping ground pours and guiding hair-like wires into their proper place. Excel knife comes with aluminum handl
- TOL-09200
- SparkFun
-
1:
$3.75
-
25In Stock
|
Mouser Part #
474-TOL-09200
|
SparkFun
|
SparkFun Accessories It's like an Xacto knife only better. We use these extensively when working with PCBs. These small knives work well for cutting traces scraping ground pours and guiding hair-like wires into their proper place. Excel knife comes with aluminum handl
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Solder wick coffee and paper towels keep SparkFun running. You can steal someone's diagonal cutters for a minute but you'd better ask before touching their solder wick.Solder wick is composed of copper threads braided together. Flux is normally ad
- TOL-09327
- SparkFun
-
1:
$2.98
-
12In Stock
|
Mouser Part #
474-TOL-09327
|
SparkFun
|
SparkFun Accessories Solder wick coffee and paper towels keep SparkFun running. You can steal someone's diagonal cutters for a minute but you'd better ask before touching their solder wick.Solder wick is composed of copper threads braided together. Flux is normally ad
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories We don't say this lightly: this might be the best solder on the market! There we said it. This "Special Blend" wasn't just picked from a catalog; it is the result of a quest to find the perfect alloy for our own production lines here at SparkFun. Af
- TOL-10242
- SparkFun
-
1:
$63.56
-
3In Stock
|
Mouser Part #
474-TOL-10242
|
SparkFun
|
SparkFun Accessories We don't say this lightly: this might be the best solder on the market! There we said it. This "Special Blend" wasn't just picked from a catalog; it is the result of a quest to find the perfect alloy for our own production lines here at SparkFun. Af
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm 1.23mm thick needles and two smaller 39mm 0.67mm thick needles. The eye of each size needle is large enough to easily t
- TOL-10405
- SparkFun
-
1:
$2.66
-
15In Stock
|
Mouser Part #
474-TOL-10405
|
SparkFun
|
SparkFun Accessories This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm 1.23mm thick needles and two smaller 39mm 0.67mm thick needles. The eye of each size needle is large enough to easily t
|
|
15In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a high quality AC to DC 'wall wart' which produces a regulated output of 12VDC at up to 600mA. These are switch mode power supplies which means the output is regulated to 12V (no more 14V outputs!) and the capable output current is much high
- TOL-15313
- SparkFun
-
1:
$9.25
-
4In Stock
|
Mouser Part #
474-TOL-15313
|
SparkFun
|
SparkFun Accessories This is a high quality AC to DC 'wall wart' which produces a regulated output of 12VDC at up to 600mA. These are switch mode power supplies which means the output is regulated to 12V (no more 14V outputs!) and the capable output current is much high
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories U.FL SMD Connector
- WRL-09144
- SparkFun
-
1:
$1.79
-
29In Stock
|
Mouser Part #
474-WRL-09144
|
SparkFun
|
SparkFun Accessories U.FL SMD Connector
|
|
29In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories TRRS connectors are the 3.5mm audio-style connectors that you see on some phones MP3 players and development boards. TRRS stands for "Tip Ring Ring Sleeve " which reflects the fact that unlike a standard stereo connector this actually has three
- CAB-11580
- SparkFun
-
1:
$1.95
-
38In Stock
|
Mouser Part #
474-CAB-11580
|
SparkFun
|
SparkFun Accessories TRRS connectors are the 3.5mm audio-style connectors that you see on some phones MP3 players and development boards. TRRS stands for "Tip Ring Ring Sleeve " which reflects the fact that unlike a standard stereo connector this actually has three
|
|
38In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-bas
- CAB-13685
- SparkFun
-
1:
$1.75
-
25In Stock
|
Mouser Part #
474-CAB-13685
|
SparkFun
|
SparkFun Accessories This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-bas
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Low-profile electrolytic decoupling capacitors 10uF/25V. These capacitors are great transient/surge suppressors and work well as charge pump caps for MAX232 circuits. High quality radial electrolytic capacitors.
- COM-00523
- SparkFun
-
1:
$0.55
-
91In Stock
|
Mouser Part #
474-COM-00523
|
SparkFun
|
SparkFun Accessories Low-profile electrolytic decoupling capacitors 10uF/25V. These capacitors are great transient/surge suppressors and work well as charge pump caps for MAX232 circuits. High quality radial electrolytic capacitors.
|
|
91In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Electrolytic decoupling capacitors 1000uF/25V. These capacitors are great transient/surge suppressors and work well in high-voltage and audio applications. High quality radial electrolytic capacitors.
- COM-08982
- SparkFun
-
1:
$0.53
-
85In Stock
|
Mouser Part #
474-COM-08982
|
SparkFun
|
SparkFun Accessories Electrolytic decoupling capacitors 1000uF/25V. These capacitors are great transient/surge suppressors and work well in high-voltage and audio applications. High quality radial electrolytic capacitors.
|
|
85In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
