|
|
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
- PRT-17546
- SparkFun
-
1:
$7.38
-
91In Stock
|
Mouser Part #
474-PRT-17546
|
SparkFun
|
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
|
|
91In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Educational Robotic Kits This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
- ROB-12629
- SparkFun
-
1:
$13.95
-
28In Stock
|
Mouser Part #
474-ROB-12629
|
SparkFun
|
Educational Robotic Kits This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
|
|
28In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
- SEN-09197
- SparkFun
-
1:
$12.47
-
5In Stock
|
Mouser Part #
474-SEN-09197
|
SparkFun
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Air Quality Sensors Carbon Monoxide Sensor MQ-7
- SEN-09403
- SparkFun
-
1:
$7.88
-
21In Stock
|
Mouser Part #
474-SEN-09403
|
SparkFun
|
Air Quality Sensors Carbon Monoxide Sensor MQ-7
|
|
21In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Screwdrivers, Nut Drivers & Socket Drivers There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure we all have a few Phillips-head drivers and maybe a few slotted drivers but what abou
- TOL-10865
- SparkFun
-
1:
$16.50
-
11In Stock
-
11On Order
|
Mouser Part #
474-TOL-10865
|
SparkFun
|
Screwdrivers, Nut Drivers & Socket Drivers There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure we all have a few Phillips-head drivers and maybe a few slotted drivers but what abou
|
|
11In Stock
11On Order
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories LiPo Battery Manager Battery Manager
- PRT-13777
- SparkFun
-
1:
$22.92
-
198In Stock
|
Mouser Part #
474-PRT-13777
|
SparkFun
|
SparkFun Accessories LiPo Battery Manager Battery Manager
|
|
198In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Small Signal Switching Diodes This is a very common signal diode - 1N4148. Use this for signals up to 200mA of current.
- COM-08588
- SparkFun
-
1:
$0.32
-
107In Stock
|
Mouser Part #
474-COM-08588
|
SparkFun
|
Small Signal Switching Diodes This is a very common signal diode - 1N4148. Use this for signals up to 200mA of current.
|
|
107In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Multi-Color LEDs Ever hear of a thing called RGB? Red Green Blue? How about an RGB LED? These 5mm units have four pins - one for each color and a common cathode (the longest pin). Use this LED for three status indicators or pulse width modulate all three and get mi
- COM-16911
- SparkFun
-
1:
$1.05
-
268In Stock
|
Mouser Part #
474-COM-16911
|
SparkFun
|
Multi-Color LEDs Ever hear of a thing called RGB? Red Green Blue? How about an RGB LED? These 5mm units have four pins - one for each color and a common cathode (the longest pin). Use this LED for three status indicators or pulse width modulate all three and get mi
|
|
268In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Single Board Computers Don t let the size fool you the BBC micro:bit v2 is the perfect device for you to get creative with digital technology! At half the size of a credit card this board is the ultimate tool for learning to code and building unique creations from int
- DEV-17287
- SparkFun
-
1:
$20.63
-
10In Stock
|
Mouser Part #
474-DEV-17287
|
SparkFun
|
Single Board Computers Don t let the size fool you the BBC micro:bit v2 is the perfect device for you to get creative with digital technology! At half the size of a credit card this board is the ultimate tool for learning to code and building unique creations from int
|
|
10In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Antennas The TOP106 from TOPGNSS is a certified GNSS/GPS surveying antenna capable of receiving the L1/L2 bands for GPS GLONASS Galileo and BeiDou constellations. These 'UFO' antennas have incredible performance for the money. The antenna has a built in gr
- GPS-17751
- SparkFun
-
1:
$238.17
-
1In Stock
|
Mouser Part #
474-GPS-17751
|
SparkFun
|
Antennas The TOP106 from TOPGNSS is a certified GNSS/GPS surveying antenna capable of receiving the L1/L2 bands for GPS GLONASS Galileo and BeiDou constellations. These 'UFO' antennas have incredible performance for the money. The antenna has a built in gr
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Pressure Sensor Development Tools This is a force sensitive resistor with a square 1.75x1.5" sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower the resistance. When no pressure is bein
- SEN-09376
- SparkFun
-
1:
$18.43
-
3In Stock
-
5Expected 8/31/2026
|
Mouser Part #
474-SEN-09376
|
SparkFun
|
Pressure Sensor Development Tools This is a force sensitive resistor with a square 1.75x1.5" sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower the resistance. When no pressure is bein
|
|
3In Stock
5Expected 8/31/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a simple thumbnail-size RFID tag. These tags are great for sensing presence identification etc. and they're small so they can be easily sewn into clothing or inserted into enclosures. Each tag comes with a unique 32-bit ID code and is no
- SEN-09417
- SparkFun
-
1:
$4.75
-
66In Stock
|
Mouser Part #
474-SEN-09417
|
SparkFun
|
NFC/RFID Tags & Transponders This is a simple thumbnail-size RFID tag. These tags are great for sensing presence identification etc. and they're small so they can be easily sewn into clothing or inserted into enclosures. Each tag comes with a unique 32-bit ID code and is no
|
|
66In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Temperature Sensors PT100 Sensor
- SPX-17059
- SparkFun
-
1:
$20.63
-
14In Stock
-
46Expected 10/9/2026
|
Mouser Part #
474-SPX-17059
|
SparkFun
|
Board Mount Temperature Sensors PT100 Sensor
|
|
14In Stock
46Expected 10/9/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Screwdrivers, Nut Drivers & Socket Drivers This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.
- TOL-09146
- SparkFun
-
1:
$1.64
-
36In Stock
|
Mouser Part #
474-TOL-09146
|
SparkFun
|
Screwdrivers, Nut Drivers & Socket Drivers This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.
|
|
36In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Interface Development Tools The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering. The ESLOV t
- BOB-23589
- SparkFun
-
1:
$2.77
-
16In Stock
|
Mouser Part #
474-BOB-23589
|
SparkFun
|
Interface Development Tools The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering. The ESLOV t
|
|
16In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Test Clips IC Test Clip SOIC 8-Pin
- COM-13153
- SparkFun
-
1:
$48.80
-
6In Stock
|
Mouser Part #
474-COM-13153
|
SparkFun
|
Test Clips IC Test Clip SOIC 8-Pin
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Photodiodes The BPW34 is a tiny general purpose PiN photodiode. This photodiode has a ton of uses one of which is to use it is a mini solar cell to power your project. The cell is sensitive to a wide range of light wavelengths (430-1100nm) so it should produc
- PRT-09541
- SparkFun
-
1:
$1.75
-
34In Stock
|
Mouser Part #
474-PRT-09541
|
SparkFun
|
Photodiodes The BPW34 is a tiny general purpose PiN photodiode. This photodiode has a ton of uses one of which is to use it is a mini solar cell to power your project. The cell is sensitive to a wide range of light wavelengths (430-1100nm) so it should produc
|
|
34In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
USB Connectors The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe
- PRT-18015
- SparkFun
-
1:
$2.13
-
18In Stock
|
Mouser Part #
474-PRT-18015
|
SparkFun
|
USB Connectors The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe
|
|
18In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Educational Robotic Kits This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. We recommend our small servo motors listed below.Note: Servos are not included. The sub-micro servo size
- ROB-10335
- SparkFun
-
1:
$6.75
-
2In Stock
|
Mouser Part #
474-ROB-10335
|
SparkFun
|
Educational Robotic Kits This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. We recommend our small servo motors listed below.Note: Servos are not included. The sub-micro servo size
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Video Modules This is the Logitech C270 Webcam. With a sleek compact look and a black finish this is not just for looks. This economical choice provides a 720p/30FPS HD resolution in a 16:9 widescreen format. The Logitech C270 webcam is compatible with most major
- SEN-16299
- SparkFun
-
1:
$51.54
-
6In Stock
|
Mouser Part #
474-SEN-16299
|
SparkFun
|
Video Modules This is the Logitech C270 Webcam. With a sleek compact look and a black finish this is not just for looks. This economical choice provides a 720p/30FPS HD resolution in a 16:9 widescreen format. The Logitech C270 webcam is compatible with most major
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Raspberry Pi Accessories Raspberry Pi GPIO Ribbon Cable 40pin6
- CAB-13028
- SparkFun
-
1:
$4.00
-
191In Stock
-
150Expected 10/27/2026
|
Mouser Part #
474-CAB-13028
|
SparkFun
|
Raspberry Pi Accessories Raspberry Pi GPIO Ribbon Cable 40pin6
|
|
191In Stock
150Expected 10/27/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Raspberry Pi Accessories This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
- PRT-13054
- SparkFun
-
1:
$1.05
-
59In Stock
|
Mouser Part #
474-PRT-13054
|
SparkFun
|
Raspberry Pi Accessories This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
|
|
59In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-10127
- SparkFun
-
1:
$4.84
-
27In Stock
|
Mouser Part #
474-SEN-10127
|
SparkFun
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
27In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-10128
- SparkFun
-
1:
$4.84
-
157In Stock
|
Mouser Part #
474-SEN-10128
|
SparkFun
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
157In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Force Sensors & Load Cells This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
- SEN-11207
- SparkFun
-
1:
$30.86
-
5In Stock
|
Mouser Part #
474-SEN-11207
|
SparkFun
|
Force Sensors & Load Cells This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|