Renesas Electronics Synergy™ S5D5 Arm® Microcontrollers

Renesas Synergy™ S5D5 Arm® Microcontrollers provide a high-performance Arm Cortex® M4 core running up to 120MHz. These MCUs feature up to 1MB code flash memory, 384KB SRAM, Capacitive Touch Sensing Unit (CTSU), 12-Bit A/D Converter (ADC12), and 12-Bit D/A Converter (DAC12). The S5D5 MCUs include Ethernet MAC Controller (ETHERC), Ethernet DMA Controller (EDMAC), USB 2.0 full-speed, Quad Serial Peripheral Interface (QSPI), security, safety, and analog features. The S5D5 MCUs are ideal for home, industrial, and automation applications.

The Renesas Electronics Synergy™ S5D5 Arm® Microcontrollers are offered in 7mm x 7mm LGA-145, 20mm x 20mm LQFP-100, and 14mm x 14mm LQFP-144 packages.

Features

Arm Cortex-M4 Core with Floating Point Unit (FPU)
- Armv7E-M architecture with DSP instruction set
- Maximum operating frequency: 120MHz
- Support for 4GB address space
- On-chip debugging system: JTAG, SWD, and ETM
- Boundary-scan and Arm Memory Protection Unit (Arm MPU)
Memory
- Up to 1MB code flash memory (40MHz zero wait states)
- 32KB data flash memory (125,000 erase/write cycles)
- Up to 384KB SRAM
- Flash Cache (FCACHE)
- Memory Protection Units (MPU)
- Memory Mirror Function (MMF)
- 128-bit unique ID
Connectivity
- Ethernet MAC Controller (ETHERC)
- Ethernet DMA Controller (EDMAC)
- USB 2.0 Full-Speed (USBFS) module
  - On-chip transceiver
- Serial Communications Interface (SCI) with FIFO x10
- Serial Peripheral Interface (SPI) x2
- I²C bus interface (IIC) x3
- Controller Area Network (CAN) x2
- Serial Sound Interface Enhanced (SSIE)
- SD/MMC Host Interface (SDHI) x2
- Quad Serial Peripheral Interface (QSPI)
- IrDA interface
- Sampling Rate Converter (SRC)
- External address space
  - 8-bit or 16-bit bus space is selectable per area
  - SDRAM support
Analog
- 12-bit A/D Converter (ADC12) with 3 sample-and-hold circuits each x2
- 12-bit D/A Converter (DAC12) x2
- High-Speed Analog Comparator (ACMPHS) x6
- Temperature Sensor (TSN)
Safety

Error Correction Code (ECC) in SRAM
SRAM parity error check
Flash area protection
ADC self-diagnosis function
Clock Frequency Accuracy Measurement Circuit (CAC)
Cyclic Redundancy Check (CRC) calculator
Data Operation Circuit (DOC)
Port Output Enable for GPT (POEG)
Independent Watchdog Timer (IWDT)
GPIO readback level detection
Register write protection
Main oscillator stop detection
Illegal memory access

Timers

General PWM Timer 32-bit Enhanced High Resolution (GPT32EH) x4
General PWM Timer 32-bit Enhanced (GPT32E) x4
General PWM Timer 32-bit (GPT32) x6
Asynchronous General-Purpose Timer (AGT) x2
Watchdog Timer (WDT)

System and Power Management
- Low power modes
- Realtime Clock (RTC) with calendar and VBATT support
- Event Link Controller (ELC)
- DMA Controller (DMAC) × 8
- Data Transfer Controller (DTC)
- Key Interrupt Function (KINT)
- Power-on reset
- Low Voltage Detection (LVD) with voltage settings
Security and Encryption
- AES128/192/256
- 3DES/ARC4
- SHA1/SHA224/SHA256/MD5
- GHASH
- RSA/DSA/ECC
- True Random Number Generator (TRNG)
Human Machine Interface (HMI)
- Capacitive Touch Sensing Unit (CTSU)
- Parallel Data Capture Unit (PDC)
Multiple Clock Sources
- Main clock oscillator (MOSC) (8 to 24MHz)
- Sub-clock oscillator (SOSC) (32.768kHz)
- High-speed on-chip oscillator (HOCO) (16/18/20MHz)
- Middle-speed on-chip oscillator (MOCO) (8MHz)
- Low-speed on-chip oscillator (LOCO) (32.768kHz)
- IWDT-dedicated on-chip oscillator (15kHz)
- Clock trim function for HOCO/MOCO/LOCO
- Clock out support
General-Purpose I/O Ports
Up to 110 input/output pins
- Up to 1 CMOS input
- Up to 109 CMOS input/output
  - Up to 21 input/output 5V tolerant
  - Up to 18 high current (20mA)
Operating Voltage
- V_CC: 2,7V to 3.6V
Operating Temperature and Packages
- Ta = -40°C to +85°C
  - 145-pin LGA (7 mm × 7 mm, 5 mm pitch)
- Ta = -40°C to +105°C
  - 144-pin LQFP (20 mm × 20 mm, 5 mm pitch)
  - 100-pin LQFP (14 mm × 14 mm, 5 mm pitch)